- Information
This is the BVV™ Brand VE115 3CFM Single Stage Vacuum Pump. Single-stage vacuums pump exhaust into a chamber in the pump, which separates the oil from the pumped gas. Then, the oil is returned and the gas is exhausted.
Specification | |
---|---|
Free Air Displacement - (CFM) | 3CFM |
# Of Stages | 1 |
Voltage | 110v / 60Hz |
Ultimate Vacuum | 5 Pa |
HP | 1/4 |
Oil Capacity | 280ml |
Weight | 15LB |
Intake Connection | 1/4" SAE |
This is the BVV™ VE225 4CFM Two Stage Vacuum Pump used in botanical extraction.
Specification | |
---|---|
Free Air Dispalcement - (CFM) | 4CFM |
# Of Stages | 2 |
Voltage | 110v / 60Hz |
Ultimate Vacuum | 25 Micron |
HP | 1 |
Oil Capacity | 280ml |
Weight | 22LB |
Intake Connection | 1/4" SAE, 3/8" SAE |
This is the BVV™ Brand VE160 7CFM Single Stage Vacuum Pump.
Specification | |
---|---|
Free Air Dispalcement - (CFM) | 7CFM |
# Of Stages | 1 |
Voltage | 110v / 60Hz |
Ultimate Vacuum | 5 Pa |
HP | 1/2 |
Oil Capacity | 450ml |
Weight | 23LB |
Intake Connection | 1/4" SAE, 3/8" SAE |
This is the BVV™ Brand VE280 9CFM Two Stage Vacuum Pump.
Specification | |
---|---|
Free Air Dispalcement - (CFM) | 9CFM |
# Of Stages | 2 |
Voltage | 110v / 60Hz |
Ultimate Vacuum | 25 Micron |
HP | 1 |
Oil Capacity | 560ml |
Weight | 38LB |
Intake Connection | 1/4" SAE, 3/8" SAE |
Key Features:
- Internal Check Valve
- Oil Mist Filter Cap
- Larger Oil Reservoir for longer Oil life
- Lightweight
- Rubber Feet for noise dampening
- Reliable, Economical and Efficient.
Pump Warranty Information
- Customers using solvents such as stabilization resins (MinWax™, Gator Venom™ etc.), alcohol and other polar solvents must use the vacuum pumps in conjunction with a cold trap for evacuations in excess of 5 minutes. (Excludes Cactus Juice™)
- If the consumer is using the pump for prolonged periods of time exceeding 5 minutes we require that a cold trap is used or the pump warranty is void.
- These stabilization resins have the ability to break down the internal components of the pump that are plastic resulting in a seized motor voiding all warranties.
- When evacuation exceeds 5 minutes these solvents begin to vaporize and then re-condense in the vacuum pump reservoir. Once enough solvent re-condenses in the pump displacing the oil the plastic internal components may begin to warp, melt or seize. The use of a cold trap will condense the vapors prior to making their way to the vacuum pump preventing pump damage due to excessive use. Furthermore, Minwax Wood Hardener™ is not to be used with any vacuum pumps, EVER. (A seized motor will result within the first use.)
- To prevent these issues from happening to your process, change the Oil after each vacuum pump use, Even if the use time is only 5min.